Take a Look at Our Offer of Bending Machines!

Check it out!

 
 
 

HKS-Cs Profi

HKS-Cs Profi

HKS-Cs Profi

Hydraulic machine HKS-Cs Profi with automatic scissors, frequency regulator, movable mass, and the option of manual or automatic operation mode.

 
 
 

Hydraulic bending machines HKS-Cs Profi are equipped with automatic scissors, backgauge system and a touch-screen. Cs software enables simple manual operating and automatic bending with NC programming. With a memory of 200 programmes, the machine can satisfy the needs of regular as well as of high-productivity manufacturers. The bending bar is reinforced so as to to achieve greaterprecision of the bending angle of sheet metal.

Working width of Cs Profi machine is 1.150 mm, and maximum sheet metal thickness (when bending) is 1,00 mm (steel) and 1,5 mm (Al).

The machines are driven by electric motors through a hydraulic pump, which enables better bending dynamics by means of frequency  regulation.

The working lenght of machines are:

  • HKS-Cs Profi 8,2m
  • HKS-Cs Profi 7m
  • HKS-Cs Profi 6,1m
  • HKS-Cs Profi 5m
  • HKS-Cs Profi 4m
Tehnical data

 

HKS-Cs Profi 8m

HKS-Cs Profi 7m

HKS-Cs Profi 6m

HKS-Cs Profi 5m

HKS-Cs Profi 4m

Working length
8.200 mm 7.000 mm 6.100 mm  5.000 mm  4.000 mm
Bending angle
145° 145° 145°  145°  145°
Sheet metal thickness

Steel 1,0 mm (400 N/mm^2), Al 1,5 mm

Steel 1,0 mm (400 N/mm^2), Al 1,5 mm

Steel 1,0 mm (400 N/mm^2), Al 1,5 mm

Steel 1,0 mm (400 N/mm^2), Al 1,5 mm Steel 1,0 mm (400 N/mm^2), Al 1,5 mm
Working width
1.150 mm 1.150 mm 1.150 mm  1.150 mm  1.150 mm
Length of machine
9.100 mm 7.900 mm 7.000 mm  5.900 mm  4.900 mm
Weight
4.400 kg 4.000 kg 3.600 kg  3.200 kg  2.500 kg
Number of arms
7 6 5  4  4
Power

6,5 kW

4,75 kW

3,75 kW  3 kW  3 kW
Power of electric motor
5,5 kW 4 kW 3 kW  2,2 kW

 

 2,2 kW

 

 

Cs Computer

A computer with a selection of automatic or manual mode, with very simple NC programming and a touch-screen. In the automatic programming mode, up to 200 different programmes can be saved, which can include up to 40 steps. A computer with the selection of automatic or manual mode, with very simple programming and a touchscreen.

The functions of the machine enable faster and safer operation. In the manual mode, we can select any bending angle or decide to select one of 10 standard or fast angles. In the automatic mode, we can save up to 200 different programmes, which can include up to 40 steps. Since the closing pressure is measured, the machine presses the metal with a 100% pressure in case of pressing double sheet metal. Since the sheet metal closing pressure is measured, the sheet metal is pressed with 60% pressure when bending, which increases operating speed.

Profi console arms 

All the HKS-Cs Profi machines are equipped with Profi console arms. They are stronger, wider, and enable an operating depth of 1,150 mm.

 

 

 

Backgauge system

The system of sheet metal movement is electrically driven by front fingers and back support for sheet metal. The position of a backgauge system is measured by a  measuring rod.

 The backgauge system enables the positioning of sheet metal to the precision of +/- 0,1 mm, without manual calibration.

Roller shears

Shears are driven by a hydraulic motor through a steel wire. 

Inquiry

Send Inquiry.

To make an inquiry, please fill in the form below and we will contact you in the very near future

    1. STROJEGRADNJA SAS, Arzenšek Stanko s.p. places particular emphasis on the security of your personal information. More details regarding the use and processing of your personal information can be found in the Privacy Policy.