CONTACT | LOCATION | +386 (0)3 810 41 10 |
Menu
Close
Hydraulic machine HKS-Pf Profi with automatic scissors, frequency regulator, and the option of manual or automatic operation mode.
Hydraulic bending machines HKS-Pf Profi are equipped with automatic scissors and a 5.7-inch touch-screen. Pf software enables simple manual operating and automatic bending with easy programming. With a memory of up to 100 programmes, the machine can satisfy the needs of tinsmiths. The bending bar is reinforced so as to achieve greater precision of the bending angle of sheet metal.
Working width of Pf Profi machine is 1.150 mm, and maximum sheet metal thickness (when bending) is 1,00 mm (steel) and 1,5 mm (Al).
The machines are driven by electric motors through a hydraulic pump, which enables better bending dynamics by means of frequency regulation.
The working lenght of machines are:
HKS-Pf Profi 8m |
HKS-Pf Profi 7m |
HKS-Pf Profi 6m |
HKS-Pf Profi 5m |
HKS-Pf Profi 4m |
|
Working length |
8.200 mm | 7.000 mm | 6.100 mm | 5.000 mm | 4.000 mm |
Bending angle |
145° | 145° | 145° | 145° | 145° |
Sheet metal thickness |
Steel 1,0 mm (400 N/mm^2), Al 1,5 mm |
Steel 1,0 mm (400 N/mm^2), Al 1,5 mm |
Steel 1,0 mm (400 N/mm^2), Al 1,5 mm |
Steel 1,0 mm (400 N/mm^2), Al 1,5 mm |
Steel 1,0 mm (400 N/mm^2), Al 1,5 mm |
Working width |
1.150 mm | 1.150 mm | 1.150 mm | 1.150 mm | 1.150 mm |
Length of machine |
9.100 mm | 7.900 mm | 7.000 mm | 5.900 mm | 4.900 mm |
Weight |
3.800 kg | 3.300 kg | 2.800 kg | 2.400 kg | 2.200 kg |
Number of arms |
7 | 6 | 5 | 4 | 4 |
Power of electric motor |
5,5 kW | 4 kW | 3 kW | 2,2 kW |
2,2 kW |
![]() |
Pf ComputerA computer with the option of manual or automatic operation mode. In the manual mode, we can select any bending angle or decide for one of 8 standard or fast angles. In the automatic mode, we can save up to 100 different programmes, which can be named and saved in 10 categories. Each programme can include up to 20 steps. Since the closing pressure is measured, the machine presses the metal with a 100% pressure in case of pressing double sheet metal. Since the sheet metal closing pressure is measured, the sheet metal is pressed with 60% pressure when bending, which increases operating speed.
|
Profi console armsAll HKS-Pf Profi machines are equipped with Profi console arms. They are stronger, wider and enable the operating depth of 1,150 mm.
|
![]() |
|
Roller shearsRoller shears with a motor drive and power transmission through a 7-mm-thick steel wire. |
Send Inquiry.
To make an inquiry, please fill in the form below and we will contact you in the very near future
Phone +386 (0)3 810 41 10
Mobile: +386 (0)41 667 473
Fax: +386 (0)3 810 41 11
E-mail: info@strojegradnja-sas.si
Arzenšek Stanko s.p. © Copyrights reserved
Our website uses cookies for better user experience
By continuing to browse our website you agree to our use of cookies which helps us provide you with a good user experience on our website. We use Google Analytics for our own analytical purposes and it installs cookies for this purpose (delete GA cookies). More about cookies.