CONTACT | LOCATION | +386 (0)3 810 41 10 |
Menu
Close
Hydraulic machine HKS-Cs Profi with automatic scissors, frequency regulator, movable mass, and the option of manual or automatic operation mode.
Hydraulic bending machines HKS-Cs Profi are equipped with automatic scissors, backgauge system and a touch-screen. Cs software enables simple manual operating and automatic bending with NC programming. With a memory of 200 programmes, the machine can satisfy the needs of regular as well as of high-productivity manufacturers. The bending bar is reinforced so as to to achieve greaterprecision of the bending angle of sheet metal.
Working width of Cs Profi machine is 1.150 mm, and maximum sheet metal thickness (when bending) is 1,00 mm (steel) and 1,5 mm (Al).
The machines are driven by electric motors through a hydraulic pump, which enables better bending dynamics by means of frequency regulation.
The working lenght of machines are:
HKS-Cs Profi 8m |
HKS-Cs Profi 7m |
HKS-Cs Profi 6m |
HKS-Cs Profi 5m |
HKS-Cs Profi 4m |
|
Working length |
8.200 mm | 7.000 mm | 6.100 mm | 5.000 mm | 4.000 mm |
Bending angle |
145° | 145° | 145° | 145° | 145° |
Sheet metal thickness |
Steel 1,0 mm (400 N/mm^2), Al 1,5 mm |
Steel 1,0 mm (400 N/mm^2), Al 1,5 mm |
Steel 1,0 mm (400 N/mm^2), Al 1,5 mm |
Steel 1,0 mm (400 N/mm^2), Al 1,5 mm | Steel 1,0 mm (400 N/mm^2), Al 1,5 mm |
Working width |
1.150 mm | 1.150 mm | 1.150 mm | 1.150 mm | 1.150 mm |
Length of machine |
9.100 mm | 7.900 mm | 7.000 mm | 5.900 mm | 4.900 mm |
Weight |
4.100 kg | 3.600 kg | 3.100 kg | 2.600 kg | 2.400 kg |
Number of arms |
7 | 6 | 5 | 4 | 4 |
Power |
5,5 kW |
4 kW |
3 kW | 2,2 kW | 2,2 kW |
Power of electric motor |
5,5 kW | 4 kW | 3 kW | 2,2 kW |
2,2 kW
|
![]() |
Cs ComputerA computer with a selection of automatic or manual mode, with very simple NC programming and a touch-screen. In the automatic programming mode, up to 200 different programmes can be saved, which can include up to 40 steps. A computer with the selection of automatic or manual mode, with very simple programming and a touchscreen. The functions of the machine enable faster and safer operation. In the manual mode, we can select any bending angle or decide to select one of 10 standard or fast angles. In the automatic mode, we can save up to 200 different programmes, which can include up to 40 steps. Since the closing pressure is measured, the machine presses the metal with a 100% pressure in case of pressing double sheet metal. Since the sheet metal closing pressure is measured, the sheet metal is pressed with 60% pressure when bending, which increases operating speed. |
Profi console armsAll the HKS-Cs Profi machines are equipped with Profi console arms. They are stronger, wider, and enable an operating depth of 1,150 mm.
|
![]() |
|
Backgauge systemThe system of sheet metal movement is electrically driven by front fingers and back support for sheet metal. The position of a backgauge system is measured by a measuring rod. The backgauge system enables the positioning of sheet metal to the precision of +/- 0,1 mm, without manual calibration. |
Roller shearsShears are driven by a hydraulic motor through a steel wire. |
|
Send Inquiry.
To make an inquiry, please fill in the form below and we will contact you in the very near future
Phone +386 (0)3 810 41 10
Mobile: +386 (0)41 667 473
Fax: +386 (0)3 810 41 11
E-mail: info@strojegradnja-sas.si
Arzenšek Stanko s.p. © Copyrights reserved
Our website uses cookies for better user experience
By continuing to browse our website you agree to our use of cookies which helps us provide you with a good user experience on our website. We use Google Analytics for our own analytical purposes and it installs cookies for this purpose (delete GA cookies). More about cookies.