HKS-Pf Profi

HKS-Pf Profi

HKS-Pf Profi

Hydraulic machine HKS-Pf Profi with automatic scissors, frequency regulator, and the option of manual or automatic operation mode.

 
 
 

Hydraulic bending machines HKS-Pf Profi are equipped with automatic scissors and a 5.7-inch touch-screen. Pf software enables simple manual operating and automatic bending with easy programming. With a memory of up to 100 programmes, the machine can satisfy the needs of tinsmiths. The bending bar is reinforced so as to achieve greater precision of the bending angle of sheet metal.

Working width of Pf Profi machine is 1.150 mm, and maximum sheet metal thickness (when bending) is 1,00 mm (steel) and 1,5 mm (Al).

The machines are driven by electric motors through a hydraulic pump, which enables better bending dynamics by means of frequency  regulation.

The working lenght of machines are:

  • HKS-Pf Profi 8,2m
  • HKS-Pf Profi 7m
  • HKS-Pf Profi 6,1m
  • HKS-Pf Profi 5m
  • HKS-Pf Profi 4m
Tehnical data

 

HKS-Pf Profi 8m

HKS-Pf Profi 7m

HKS-Pf Profi 6m

HKS-Pf Profi 5m

HKS-Pf Profi 4m

Working length
8.200 mm 7.000 mm 6.100 mm  5.000 mm  4.000 mm
Bending angle
145° 145° 145°  145°  145°
Sheet metal thickness

Steel 1,0 mm (400 N/mm^2), Al 1,5 mm

Steel 1,0 mm (400 N/mm^2), Al 1,5 mm

Steel 1,0 mm (400 N/mm^2), Al 1,5 mm

Steel 1,0 mm (400 N/mm^2), Al 1,5 mm

Steel 1,0 mm (400 N/mm^2), Al 1,5 mm

Working width
1.150 mm 1.150 mm 1.150 mm  1.150 mm  1.150 mm
Length of machine
9.100 mm 7.900 mm 7.000 mm  5.900 mm  4.900 mm
Weight
3.800 kg 3.300 kg 2.800 kg  2.400 kg  2.200 kg
Number of arms
7 6 5  4  4
Power of electric motor
5,5 kW 4 kW 3 kW  2,2 kW

 

2,2 kW

 

 

Pf Computer

computer with the option of manual or automatic operation mode. In the manual mode, we can select any bending angle or decide for one of 8 standard or fast angles. In the automatic mode, we can save up to 100 different programmes, which can be named and saved in 10 categories.

Each programme can include up to 20 steps. Since the closing pressure is measured, the machine presses the metal with a 100% pressure in case of pressing double sheet metal. Since the sheet metal closing pressure is measured, the sheet metal is pressed with 60% pressure when bending, which increases operating speed.

 

Profi console arms  

All HKS-Pf Profi machines are equipped with Profi console arms. They are stronger, wider and enable the operating depth of 1,150 mm.

 

Roller shears

Roller shears with a motor drive and power transmission through a 7-mm-thick steel wire. 

Inquiry

Send Inquiry.

To make an inquiry, please fill in the form below and we will contact you in the very near future

    1. STROJEGRADNJA SAS, Arzenšek Stanko s.p. places particular emphasis on the security of your personal information. More details regarding the use and processing of your personal information can be found in the Privacy Policy.